Hayman Reese PRO7040 Towbar Boot Scraper – Heavy Duty Aluminium with Fibre Brush

If you're spending any real time outdoors in Australia — hiking, farming, at a worksite, or camped somewhere off the beaten track — you already know the ritual. Before you get back in the car, you scrape your boots. What you probably don't have is a dedicated, purpose-built place to do it right at the back of your vehicle, right where you need it. The Hayman Reese PRO7040 Towbar Boot Scraper fixes that. It mounts securely under your towball, putting a heavy-duty aluminium scraper and stiff fibre brush exactly where you're already standing when you climb back into the cab — so mud, dirt, grass, and grit stay on the ground where it belongs, not ground into your carpet and floor mats.

Mounted Where You Actually Use It

Most boot scrapers end up at the back door, which is already too late if you've walked through the cabin to get there. The PRO7040 installs directly beneath your towball at the rear of your vehicle — the exact spot where you're standing when you open the tailgate or back door. One quick scrape and brush before you step up, and the inside of your 4x4, ute, or wagon stays cleaner with zero extra effort or detour. It's the logical location for a boot scraper, and it's surprising more people don't have one there.

Heavy Duty Aluminium Scraper — Built for Real Muck

The scraper plate is constructed from heavy duty aluminium — tough enough to handle the kind of serious caking that comes from a muddy campsite, a wet farm paddock, or a day on a construction site. Aluminium keeps it lightweight and corrosion-resistant, so it won't rust out over time despite permanent exposure to the elements. The scraper edge is designed to do actual work — not just scrape off the top layer, but get into the tread and shift the built-up mud and debris that wrecks floor mats and footwells.

Heavy Duty Fibre Brush — Finishes the Job

The scraper removes the bulk, and the integrated heavy duty fibre brush handles the rest — knocking out the finer grit, sand, and dried dirt that the scraper leaves behind. Together, the two-stage action gives you a genuinely clean boot before you step in, not just a less-muddy one. The stiff bristles are built to handle repeated use under all conditions, and won't collapse or soften after a season of hard use.

Secured Under the Towball — No Theft, No Movement

The PRO7040 secures directly under your towball mounting, which means it stays exactly where you put it — no rattling, no shifting, and no walking off. The towball mount location also means it's not easily removed by anyone passing by, making it effectively self-securing against opportunistic theft. It stays put while you tow, while you're parked up at camp, and while you're on the road — ready every time you need it.

Easy to Install — Fits Most Towbars

No drilling, no welding, no specialist tools. The PRO7040 is designed to fit most standard towbars and installs in minutes using the existing towball mounting hardware. It's a simple, permanent addition to your tow setup that you fit once and forget about — until you actually need it, every single time you come back to the vehicle with dirty boots.

Important Notes

• The PRO7040 may need to be temporarily removed for tight turns, off-road driving, or if your trailer coupling arm has attachments that extend below the coupling
• Not compatible with weight distribution hitches — remove before fitting a WDH
• Do not use as a step — it is a boot scraper only and is not load-rated for standing on

Key Specifications

Ideal for: 4x4 owners, campers, farmers, tradies, hikers, and anyone who regularly returns to their vehicle with dirty boots and wants to protect their cabin, carpet, and floor mats without adding another step to the process.